Please read ALL notes on the pages of the mount that you are looking to purchase, this will save mis-ordered mounts from being shipped and prevent you from having to re-order and then return the wrong product.

Skeeter 2020-2025+ FXR / ZXR Single Dash Mount

If your dash looks like this, then this mount will fit.

 **Mega Single Mount Shown**

 

NOTE: Some Skeeter Models, Skeeter changes the hole patterns on Dash and Bow Plates almost ever year, so we quit trying to chase their hole patterns and we put our own pattern in the plates. The BBT Bow plates are slightly longer on the bottom side of the 2014+FX/2015+ZX so it better fits our stack tops and risers and have more screw holes than factory for better attachment.

BBT will supply a Larger size # 10 screws with all Dash and Bow mounts. If you need to drill new holes, use a 5/32 drill it to install the
BBT screws and caps.

If you have very large units and it is not listed in the drop down menu for GPS/Sonar, then go to Skeeter 2020 FXR MEGA Single Dash Mount

Skeeter is in the process of changing the Dash Console plates, so we do not know which plate shape that they are sending on your boat.  Please look at your console plate shape at the "Arrows" to determine which plate you have.

$350.00
Choose options

Skeeter 2020-2025+ FXR / ZXR MEGA Single Dash Mount

If your dash looks like this, then this mount will fit.

 

 

NOTE: Some Skeeter Models, Skeeter changes the hole patterns on Dash and Bow Plates almost ever year, so we quit trying to chase their hole patterns and we put our own pattern in the plates. The BBT Bow plates are slightly longer on the bottom side of the 2014+FX/2015+ZX so it better fits our stack tops and risers and have more screw holes than factory for better attachment.

BBT will supply a Larger size # 10 screws with all Dash and Bow mounts. If you need to drill new holes, use a 5/32 drill it to install the
BBT screws and caps.

If you have smaller units that are not listed in the drop down menu for GPS/Sonar, then go to Skeeter 2020 FXR Single Dash Mount

Disclaimer: The Apex Factory Gimbal brackets have a Hole Pattern in them that "Does Not" match any previous hole pattern used by Humminbird in the past. We will send a Hole pattern with mounts that have a Apex model graph and you will need to mark your factory Apex gimbal Bracket and drill 9/32 holes them to match our pattern.

Note: The BBT Cheyenne Series Apex Gimbal Brackets will have the same hole pattern in them as Helix and Solix Gimbal Brackets.

Skeeter is in the process of changing the Dash Console plates, so we do not know which plate shape that they are sending on your boat.  Please look at your console plate shape at the "Arrows" to determine which plate you have.

$405.00
Choose options

Skeeter 2020-2025+ FXR / ZXR Dual Dash Mount

If your dash looks like this, then this mount will fit.

  • IMG 6595
    Regular Mount
  • 2021 SKEETER FXR - DUAL SOLIX 12'S
    Regular Mount
  • thumbnail image0
    Mega Mount
  • IMG 0935
    Mega Mount
  • IMG 4344
    Mega Mount

 

NOTE: Some Skeeter Models, Skeeter changes the hole patterns on Dash and Bow Plates almost ever year, so we quit trying to chase their hole patterns and we put our own pattern in the plates. The BBT Bow plates are slightly longer on the bottom side of the 2014+FX/2015+ZX so it better fits our stack tops and risers and have more screw holes than factory for better attachment.

BBT will supply a Larger size # 10 screws with all Dash and Bow mounts. If you need to drill new holes, use a 5/32 drill it to install the
BBT screws and caps.

 If you have very large units and it is not listed in the drop down menu for GPS/Sonar, then go to Skeeter 2020 FXR MEGA Dual Dash Mount

Skeeter is in the process of changing the Dash Console plates, so we do not know which plate shape that they are sending on your boat.  Please look at your console plate shape at the "Arrows" to determine which plate you have.

$405.00
Choose options

Skeeter 2020-2025+ FXR / ZXR MEGA Dual Dash Mount

If your dash looks like this, then this mount will fit.

  • IMG 6595
    Regular Mount
  • 2021 SKEETER FXR - DUAL SOLIX 12'S
    Regular Mount
  • thumbnail image0
    Mega Mount
  • IMG 0935
    Mega Mount
  • IMG 4344
    Mega Mount

 

NOTE: Some Skeeter Models, Skeeter changes the hole patterns on Dash and Bow Plates almost ever year, so we quit trying to chase their hole patterns and we put our own pattern in the plates. The BBT Bow plates are slightly longer on the bottom side of the 2014+FX/2015+ZX so it better fits our stack tops and risers and have more screw holes than factory for better attachment.

BBT will supply a Larger size # 10 screws with all Dash and Bow mounts. If you need to drill new holes, use a 5/32 drill it to install the
BBT screws and caps.

 If you have smaller units that are not listed in the drop down menu for GPS/Sonar, then go to Skeeter 2020 FXR Dual Dash Mount

Disclaimer: The Apex Factory Gimbal brackets have a Hole Pattern in them that "Does Not" match any previous hole pattern used by Humminbird in the past. We will send a Hole pattern with mounts that have a Apex model graph and you will need to mark your factory Apex gimbal Bracket and drill 9/32 holes them to match our pattern.

Note: The BBT Cheyenne Series Apex Gimbal Brackets will have the same hole pattern in them as Helix and Solix Gimbal Brackets.

Skeeter is in the process of changing the Dash Console plates, so we do not know which plate shape that they are sending on your boat.  Please look at your console plate shape at the "Arrows" to determine which plate you have.

$450.00
Choose options

Skeeter 2020/2021 Only - FXR / ZXR Triple Bow Hood Mount (w D134 Leveler/ Plate # SKB116)

If your bow looks like this, then this mount will fit.

 

NOTE: Some Skeeter Models, Skeeter changes the hole patterns on Dash and Bow Plates almost ever year, so we quit trying to chase their hole patterns and we put our own pattern in the plates. The BBT Bow plates are slightly longer on the bottom side of the 2014+FX/2015+ZX so it better fits our stack tops and risers and have more screw holes than factory for better attachment.

BBT will supply a Larger size # 10 screws with all Dash and Bow mounts. If you need to drill new holes, use a 5/32 drill it to install the
BBT screws and caps.

If you have a question concerning the graphs you want to mount, call the shop and ask - 706-217-6161

Each Triple mount comes with a replacement bow plate. We have also integrated a slider bar system for the Top and Bottom row to be able to slide the units to the left and right to help miss whatever brand trolling motor you have.

This mount includes leveler D, which is a requirement for this mount.

FOR MORE INFORMATION ON THE "HOOD" STYLE BOW MOUNT - PLEASE CLICK HERE.

$450.00
Choose options
  1. Skeeter 2020/2021 Only - FXR / ZXR Dual Bow Stack Hood Mount (w D134 Leveler/ Plate # SKB116)
  2. Skeeter 2020/2021 Only - FXR / ZXR Single Bow Hood Mount (w D134 Leveler/D122 Riser / Plate # SKB116)

Important

***The Bass Boat Technologies mount System utilizes the Factory Gimbal Brackets for each unit. If your units are currently Flush Mounted in the Dash or Bow, you will need to get the Gimbal Brackets to fit your unit.

No Gimbal Brackets or Knobs are supplied. All Mounting hardware is supplied with each Mount System. ***

Each Custom BBT mount comes with a replacement plate (3/16 Alum) and the mount systems are already attached and set for your choice of GPS/Sonar's

Dual Mount Conversions

 Dash Mount Conversions: Dash Conversions from a Single Mount to a Dual Mount and visa-versa are not possible.

The Single and Dual mounts are totally different Designs. If your mount is under a Year old, we do consider Trade-ins to upgrade.

 SSL CertificateMade In The USA