Please read ALL notes on the pages of the mount that you are looking to purchase, this will save mis-ordered mounts from being shipped and prevent you from having to re-order and then return the wrong product.
(2012-2014) Skeeter ZX "Mega" Dual Dash Mount - Plate#SK106
If your dash looks like this and plate measures 10 3/4" x 8", this mount will fit.
**Regular Dual Mount shown for reference**
|
NOTE: Some Skeeter Models, Skeeter changes the hole patterns on Dash and Bow Plates almost ever year, so we quit trying to chase their hole patterns and we put our own pattern in the plates. The BBT Bow plates are slightly longer on the bottom side of the 2014+FX/2015+ZX so it better fits our stack tops and risers and have more screw holes than factory for better attachment. BBT will supply a Larger size # 10 screws with all Dash and Bow mounts. If you need to drill new holes, use a 5/32 drill it to install the |
Disclaimer: The Apex Factory Gimbal brackets have a Hole Pattern in them that "Does Not" match any previous hole pattern used by Humminbird in the past. We will send a Hole pattern with mounts that have a Apex model graph and you will need to mark your factory Apex gimbal Bracket and drill 9/32 holes them to match our pattern. Note: The BBT Cheyenne Series Apex Gimbal Brackets will have the same hole pattern in them as Helix and Solix Gimbal Brackets.
If you have smaller units that aren't listed, please go here: ZX Series Dual Mount (2012-2014)
(2012-2014) Skeeter ZX - Regular Dual Dash Mount - Plate# SK106
If your dash looks like this and plate measures 10 3/4" x 8", this mount will fit. For 2012-2014 models.
|
NOTE: Some Skeeter Models, Skeeter changes the hole patterns on Dash and Bow Plates almost ever year, so we quit trying to chase their hole patterns and we put our own pattern in the plates. The BBT Bow plates are slightly longer on the bottom side of the 2014+FX/2015+ZX so it better fits our stack tops and risers and have more screw holes than factory for better attachment. BBT will supply a Larger size # 10 screws with all Dash and Bow mounts. If you need to drill new holes, use a 5/32 drill it to install the |
Please note: If you have a current sonar/gps unit mounted in the dash, please list in the box below. If there was no unit mounted in dash, please write "none".
If you have larger mounts that aren't listed, please go here: Skeeter ZX Series MEGA Dual Mount (2012-2014)
(2012-2014) Skeeter ZX "Mega" Single Dash Mount - Plate# SK105
If your dash looks like this and plate measures 10 3/4" x 8", this mount will fit.
|
NOTE: Some Skeeter Models, Skeeter changes the hole patterns on Dash and Bow Plates almost ever year, so we quit trying to chase their hole patterns and we put our own pattern in the plates. The BBT Bow plates are slightly longer on the bottom side of the 2014+FX/2015+ZX so it better fits our stack tops and risers and have more screw holes than factory for better attachment. BBT will supply a Larger size # 10 screws with all Dash and Bow mounts. If you need to drill new holes, use a 5/32 drill it to install the |
Disclaimer: The Apex Factory Gimbal brackets have a Hole Pattern in them that "Does Not" match any previous hole pattern used by Humminbird in the past. We will send a Hole pattern with mounts that have a Apex model graph and you will need to mark your factory Apex gimbal Bracket and drill 9/32 holes them to match our pattern. Note: The BBT Cheyenne Series Apex Gimbal Brackets will have the same hole pattern in them as Helix and Solix Gimbal Brackets.
If you have smaller units that aren't listed, please go here: ZX Series Single Mount (2012-2014)
(2012-2014) Skeeter ZX - Regular Single Dash Mount - Plate# SK105
If your dash looks like this and plate measures 10 3/4" x 8", this mount will fit.
|
NOTE: Some Skeeter Models, Skeeter changes the hole patterns on Dash and Bow Plates almost ever year, so we quit trying to chase their hole patterns and we put our own pattern in the plates. The BBT Bow plates are slightly longer on the bottom side of the 2014+FX/2015+ZX so it better fits our stack tops and risers and have more screw holes than factory for better attachment. BBT will supply a Larger size # 10 screws with all Dash and Bow mounts. If you need to drill new holes, use a 5/32 drill it to install the |
Please note: If you have a current sonar/gps unit mounted in the dash, please list in the box below. If there was no unit mounted in dash, please write "none".
If you have larger units that aren't listed please go here: Skeeter ZX Series MEGA Single Mount (2012-2014)
Important
***The Bass Boat Technologies mount System utilizes the Factory Gimbal Brackets for each unit. If your units are currently Flush Mounted in the Dash or Bow, you will need to get the Gimbal Brackets to fit your unit.
No Gimbal Brackets or Knobs are supplied. All Mounting hardware is supplied with each Mount System. ***
Each Custom BBT mount comes with a replacement plate (3/16 Alum) and the mount systems are already attached and set for your choice of GPS/Sonar's
Dual Mount Conversions
Dash Mount Conversions: Dash Conversions from a Single Mount to a Dual Mount and visa-versa are not possible.
The Single and Dual mounts are totally different Designs. If your mount is under a Year old, we do consider Trade-ins to upgrade.
  |
BASS BOAT TECHNOLOGIES
3975 Ruby Drive
Cohutta, Ga. 30710
Phone # 1 & 2 - 706-217-6161
Phone # 3 - 706-852-2457
Mon-Fri (9:00am - 5:30pm EST)