Please read ALL notes on the pages of the mount that you are looking to purchase, this will save mis-ordered mounts from being shipped and prevent you from having to re-order and then return the wrong product.
2017-2023+ Ranger 1850/1880/2050/2080 Single Dash Slider Mount - Plate# R156/R149/R124 Slider
If your dash looks like this, then this mount will fit.
This mount is designed to be able to mount 1 Graph on a Slider Type mount. You will be able to slide the unit up and down and also have the ability to slide the unit left and right which gives you ultimate adjustability. This mount also angles the graph more towards the driver for easy viewing. This mount works the best with a "Shorty" Type BBT Gimbal Bracket. You can get them here - https://www.bassboattech.com/heavy-duty-gimbal-bracket
You may need a (1 1/2") Steering spacer for very Large Graphs being mounted for the 1850/1880/2050/2080. Spacers can be purchased here -1-1/2" Steering Wheel Spacer
2017-2023+ Ranger 1850/1880/2050/2080 "Hood" Stack Bow Mount Plate# RB133/RB161 Backer/D134 Leveler
If your bow looks like this, then this mount will fit.
Note: Mount Plate fits just inside the Rectangle area of the center of Bow Plastic Plate.
New: There is now an option in the dropbox to get either the "Standard Stack Top" or "Off-Set Right" Stack Top. The "Offset Right" tops are designed to shift both units to the right 2 inches allowing for better control of the Trolling Motor Cables, especially the Garmin Force TM and Lowrance Ghost TM large cables. These will fit any Dual Stack mount from BBT. See Example Pics. We will send the correct Top to fit what Boat Model you are buying for on the order.
FOR MORE INFORMATION ON THE "HOOD" STYLE BOW MOUNT - PLEASE CLICK HERE.
2017-2023+ Ranger 1850/1880/2050/2080 (Dual Stack Slider Dash) - Plate# R148/R149/E117/D138/D139
If your dash looks like this, then this mount will fit.
|
A = Main Top up and down Slider B = Main Bottom up and down Slider C = Top Left and Right Slider D = Bottom Left and Right Slider |
Introducing the Brand New Dual Stack Dash Slider Mount. This mount is the most versatile Dual Stack mount for the dash configuration of the Ranger Deep-V model boats. Once the mount is installed, it allows the top and bottom row Slider Plates to be able to better adjust the height of the Sonar Units and get them closer together. This feature also eliminates the old bottom row fixed position, which in some cases would interfere with switch operation and also your knee was subject to hit it.
The other neat feature is the top and bottom Sonar Units can be slid to the left and right to fine tune the position of your Sonar Units. BBT has tested every model and these are a big improvement to the older style mount we offered. This set-up allows you to use the BBT HD Gimbal Brackets that are the "Shorty" style to get the Sonar Units closer together. You can also use the regular height gimbal brackets. The 1850,1880,2050,2080 models actually tilt the units more towards the driver.
2017-2023+ Ranger 1850/1880/2050/2080 Bow Single Mount - Plate RB134
If your bow looks like this, then this mount will fit.
Important
***The Bass Boat Technologies mount System utilizes the Factory Gimbal Brackets for each unit. If your units are currently Flush Mounted in the Dash or Bow, you will need to get the Gimbal Brackets to fit your unit.
No Gimbal Brackets or Knobs are supplied. All Mounting hardware is supplied with each Mount System. ***
Each Custom BBT mount comes with a replacement plate (3/16 Alum) and the mount systems are already attached and set for your choice of GPS/Sonar's
Dual Mount Conversions
Dash Mount Conversions: Dash Conversions from a Single Mount to a Dual Mount and visa-versa are not possible.
The Single and Dual mounts are totally different Designs. If your mount is under a Year old, we do consider Trade-ins to upgrade.
  |
BASS BOAT TECHNOLOGIES
3975 Ruby Drive
Cohutta, Ga. 30710
Phone # 1 & 2 - 706-217-6161
Phone # 3 - 706-852-2457
Mon-Fri (9:00am - 5:30pm EST)