Please read ALL notes on the pages of the mount that you are looking to purchase, this will save mis-ordered mounts from being shipped and prevent you from having to re-order and then return the wrong product.

2015-2023+ Ranger 619FS/620FS/621FS / CUP Single Mega Dash Mount

 

2020-2023
2015-2019

If your Boat has this type of Dash, then this mount will fit.

 
Please measure your dash insert size for correct fit.

The 1 1/2" spacer is required for Solix 15 console mounts for the 621FS.

All others are optional for the 1 1/2" steering spacer.

Spacer can be purchased here - 1-1/2" Steering Wheel Spacer

If you have smaller units that are not listed in the drop down menu for GPS/Sonar, then go to the 619FS/620FS/621FS (2015-2019+) Single Dash Mount

Disclaimer: The Apex Factory Gimbal brackets have a Hole Pattern in them that "Does Not" match any previous hole pattern used by Humminbird in the past. We will send a Hole pattern with mounts that have a Apex model graph and you will need to mark your factory Apex gimbal Bracket and drill 9/32 holes them to match our pattern.

Note: The BBT Cheyenne Series Apex Gimbal Brackets will have the same hole pattern in them as Helix and Solix Gimbal Brackets.

$405.00
Choose options

2015-2023+ Ranger 619,620,621 FS/VS/CUP New Dual Stack Slider Dash Mount

 

2015-2019
2020-2023

 
 If your Boat has this type of Dash, then this mount will fit.
 
 
 
 

A = Main Top up and down Slider

B = Main Bottom up and down Slider

C = Top Left and Right Slider

D = Bottom Left and Right Slider

 

Introducing the Brand New Dual Stack Dash Slider Mount. This mount is the most versatile Dual Stack mount for the Dash configuration of the Ranger Deep-V Model Boats. Once the Mount is installed, it allows the Top and Bottom Row Slider Plates to be able to better adjust the height of the Sonars and get them closer together. This feature also eliminates the old bottom row fixed position, which in some cases would interfere with switch operation and also your knee was subject to hit it.

The other neat feature is the Top and Bottom Sonars can be slid to the left and right to fine tune the position of your Sonars. BBT has tested every model and they are a big improvement to the older style mount we previously offered. This set-up allows you to use the BBT HD Gimbal brackets that are the "Shorty" style to get the Sonars closer together.  You can also use the Regular Height Gimbal Brackets.

A 1-1/2" spacer is required for this mount and can be purchased here - 1-1/2" Steering Wheel Space

$475.00
Choose options

2015-2023+ Ranger 619FS/620FS/621FS/Cup - Dual "Hood" Stack Bow Mount

  • thumbnail IMG 3167
    If your bow looks like this then this mount will fit.
  • FS-Series-2015-2019-Bow
    If your bow looks like this, then this mount will fit
 
 
If your Bow looks like this, then this mount will fit.
 
You will need to measure your plate from top to bottom for correct fit. If your plastic plate has a ridge or lip on it, measure between the top and bottom lips. If your plate is the newer model and does NOT have a ridge or lip, then measure the whole plate from top to bottom.

Single and Dual Stack Bow mounts: Gimbal Savers are suggested to be used with these mounts due to the angle of the Plates.

 

Dual Stack Bow Brackets kit includes a Heavy Duty Replacement Factory Plate

 

FOR MORE INFORMATION ON THE "HOOD" STYLE BOW MOUNT - PLEASE CLICK HERE.

 

 

 

$375.00
Choose options

2015-2023+ Ranger 619FS/620FS/621FS/Cup - Triple "Hood" Stack Bow Mount

  • thumbnail IMG 3167
    If your bow looks like this then this mount will fit.
  • FS-Series-2015-2019-Bow
    If your bow looks like this, then this mount will fit

These pictures are of the "Pro" model, but this mount will look very similar
 

You will need to measure your plate from top to bottom for correct fit. If your plastic plate has a ridge or lip on it, measure between the top and bottom lips. If your plate is the newer model and does NOT have a ridge or lip, then measure the whole plate from top to bottom.

If you have a question concerning the graphs you want to mount, call the shop and ask - 706-217-6161

Each Triple mount comes with a replacement bow plate. We have also integrated a slider bar system for the Top and Bottom row to be able to slide the units to the left and right to help miss whatever brand trolling motor you have.

FOR MORE INFORMATION ON THE "HOOD" STYLE BOW MOUNT - PLEASE CLICK HERE.

$475.00
Choose options

2015-2023+ Ranger 619FS/620FS/621FS / CUP Single Dash Mount

  

2015-2019
2020-2023

If your Boat has this type of Dash, then this mount will fit.

 
 
Please measure your dash insert size for correct fit.

The 1 1/2" spacer is required for Solix 15 console mounts for the 621FS.

All others are optional for the 1 1/2" steering spacer.

Spacer can be purchased here - 1-1/2" Steering Wheel Spacer

If you have larger units that are not listed in the drop down menu for GPS/Sonar, then go to the 619FS/620FS/621FS (2015-2019+) Single MEGA Dash Mount

$350.00
Choose options
  1. 2015-2023+ Ranger 619FS/620FS/621FS / CUP Single Bow Mount

Important

***The Bass Boat Technologies mount System utilizes the Factory Gimbal Brackets for each unit. If your units are currently Flush Mounted in the Dash or Bow, you will need to get the Gimbal Brackets to fit your unit.

No Gimbal Brackets or Knobs are supplied. All Mounting hardware is supplied with each Mount System. ***

Each Custom BBT mount comes with a replacement plate (3/16 Alum) and the mount systems are already attached and set for your choice of GPS/Sonar's

Dual Mount Conversions

 Dash Mount Conversions: Dash Conversions from a Single Mount to a Dual Mount and visa-versa are not possible.

The Single and Dual mounts are totally different Designs. If your mount is under a Year old, we do consider Trade-ins to upgrade.

 SSL CertificateMade In The USA