Please read ALL notes on the pages of the mount that you are looking to purchase, this will save mis-ordered mounts from being shipped and prevent you from having to re-order and then return the wrong product.
Ranger "R" Boat - "Mega" Dual Dash Mount
If your dash looks like this, then this mount will fit.
Note: We designed the "R" Console mounts because we feel the factory shelf is too low and leaned backwards about 10 degrees to much, which will cause glare on the screens, and you cannot adjust the screen any further downwards. The BBT mount system solves this issue. Also integrated into the mounts is our antivibration system and Clean rear cover.
If you have smaller units that are not listed in the dropdown list, then go to this mount: Ranger "R" Type Dash - Dual Mount
Disclaimer: The Apex Factory Gimbal brackets have a Hole Pattern in them that "Does Not" match any previous hole pattern used by Humminbird in the past. We will send a Hole pattern with mounts that have a Apex model graph and you will need to mark your factory Apex gimbal Bracket and drill 9/32 holes them to match our pattern. Note: The BBT Cheyenne Series Apex Gimbal Brackets will have the same hole pattern in them as Helix and Solix Gimbal Brackets.
Ranger "R" Boat - "Regular" Dual Dash Mount
If your dash looks like this, then this mount will fit.
If you have larger units that are not listed in the dropdown list, then go to this mount: Ranger "R" Type Dash - Mega Dual Mount
Note: We designed the "R" Console mounts because we feel the factory shelf is too low and leaned backwards about 10 degrees to much, which will cause glare on the screens, and you cannot adjust the screen any further downwards. The BBT mount system solves this issue. Also integrated into the mounts is our antivibration system and Clean rear cover.
Ranger "R" Boat - "Mega" Single Dash Mount
If your dash looks like this, then this mount will fit.
If you have smaller units that are not listed in the drop down menu for GPS/Sonar, then go to the "R" Type Dash Single Mount
Note: We designed the "R" Console mounts because we feel the factory shelf is too low and leaned backwards about 10 degrees to much, which will cause glare on the screens, and you cannot adjust the screen any further downwards. The BBT mount system solves this issue. Also integrated into the mounts is our antivibration system and Clean rear cover.
Disclaimer: The Apex Factory Gimbal brackets have a Hole Pattern in them that "Does Not" match any previous hole pattern used by Humminbird in the past. We will send a Hole pattern with mounts that have a Apex model graph and you will need to mark your factory Apex gimbal Bracket and drill 9/32 holes them to match our pattern. Note: The BBT Cheyenne Series Apex Gimbal Brackets will have the same hole pattern in them as Helix and Solix Gimbal Brackets.
Ranger "R" Type Dash - "Regular" Single Dash Mount
If your dash looks like this, then this mount will fit.
If you have larger units that are not listed in the drop down menu for GPS/Sonar, then go to the Ranger "R" Type Dash - Mega Single Mount
Note: We designed the "R" Console mounts because we feel the factory shelf is too low and leaned backwards about 10 degrees to much, which will cause glare on the screens, and you cannot adjust the screen any further downwards. The BBT mount system solves this issue. Also integrated into the mounts is our antivibration system and Clean rear cover.
Ranger "R" Boat - Triple "Hood" Bow Mount
If your bow looks like this, then this mount will fit
If you have a question concerning the graphs you want to mount, call the shop and ask - 706-217-6161
Each Triple mount comes with a replacement bow plate. We have also integrated a slider bar system for the Top and Bottom row to be able to slide the units to the left and right to help miss whatever brand trolling motor you have.
FOR MORE INFORMATION ON THE "HOOD" STYLE BOW MOUNT - PLEASE CLICK HERE.
Important
***The Bass Boat Technologies mount System utilizes the Factory Gimbal Brackets for each unit. If your units are currently Flush Mounted in the Dash or Bow, you will need to get the Gimbal Brackets to fit your unit.
No Gimbal Brackets or Knobs are supplied. All Mounting hardware is supplied with each Mount System. ***
Each Custom BBT mount comes with a replacement plate (3/16 Alum) and the mount systems are already attached and set for your choice of GPS/Sonar's
Dual Mount Conversions
Dash Mount Conversions: Dash Conversions from a Single Mount to a Dual Mount and visa-versa are not possible.
The Single and Dual mounts are totally different Designs. If your mount is under a Year old, we do consider Trade-ins to upgrade.
  |
BASS BOAT TECHNOLOGIES
3975 Ruby Drive
Cohutta, Ga. 30710
Phone # 1 & 2 - 706-217-6161
Phone # 3 - 706-852-2457
Mon-Fri (9:00am - 5:30pm EST)