If your Bow looks like this one, this mount plate will fit.
|
NOTE: Some Skeeter Models, Skeeter changes the hole patterns on Dash and Bow Plates almost ever year, so we quit trying to chase their hole patterns and we put our own pattern in the plates. The BBT Bow plates are slightly longer on the bottom side of the 2014+FX/2015+ZX so it better fits our stack tops and risers and have more screw holes than factory for better attachment. BBT will supply a Larger size # 10 screws with all Dash and Bow mounts. If you need to drill new holes, use a 5/32 drill it to install the |
You will have to purchase a riser in order to fit a HDS-12 Live, HDS-16 Gen2/3, Carbon and HDS-16 Live. Use this link to purchase a riser.
|
Note: The BBT ZX/FX bow plates (except ZX200 models) are slightly different than the factory plate. We added about a 1/2" at the bottom of the plate that will overhang some off the bow area towards the TM Pedal. There will be a straight angle cut edge on the plate at the bottom right lower corner. |
Note: These plates will accommodate most size units. Check the width of your gimbal bracket to insure it is not wider than the plate on your Boat.
