*** Shipping Notice ***

Shipping will be same day or next business day on most orders.

The Silver Heavy Duty Gimbal Brackets that are in some mount pictures are NOT included with any mount. They are optional and can be purchased here.

These Mounts are Designed to Secure the Larger GPS/Sonar Units.

 
  • Option A (2018 and under)
  • Option B (2019 +)
  • Option C (2020+ models)
 
For Option A - If you have this dash, and you order a Dual Dash Mount, the two smaller gauges will be moved down into our plate.
 
For Option B - The gauges will stay in the current position.  A backer plate is REQUIRED for this mount and an additional $35.00 will be added to the price.
 
 For Option C- The gauges will stay in the current position.  A backer plate is REQUIRED for this mount and an additional $35.00 will be added to the price.
 
2016 and Earlier RT Models - Your Steering wheel should have 6 screws that hold it in place. A 2 1/2" Steering Wheel spacer will be required for this mount system, which can be purchased here.

2017 + RT Models - Ranger changed the steering wheel to a 1 piece Steering Wheel/ Cog. If yours boat has Hydraulic Steering, then your steering wheel should measure from the dash to the inside top edge of steering wheel, it should read about 6 3/8 - 6 5/8", If that is the case, then no spacer should be needed in most cases. If it is 4" on that measurement, then you will need a complete changeover kit to be able to add a spacer to increase area between steering wheel and unit.  Steering Wheel Changeover Kit can be purchased here.

 
If you have a current sonar/gps unit mounted in the dash, please list in the box below.  If there was no unit mounted in dash, please write "none".
 
If you have smaller units that are not listed in the drop down menu for GPS/Sonar, then go to the RT178 / RT188 / RT198 - Single Mount

Disclaimer: The Apex Factory Gimbal brackets have a Hole Pattern in them that "Does Not" match any previous hole pattern used by Humminbird in the past. We will send a Hole pattern with mounts that have a Apex model graph and you will need to mark your factory Apex gimbal Bracket and drill 9/32 holes them to match our pattern.

Note: The BBT Cheyenne Series Apex Gimbal Brackets will have the same hole pattern in them as Helix and Solix Gimbal Brackets.

Pin It
$395.00
* Please Choose Dash Style:

* Single Mount:

* What Sonar is Flush Mounted in dash Dash Now:

* Enter Boat Year:

* Enter Boat Model:

SSL Certificate