The Silver Heavy Duty Gimbal Brackets that are in some mount pictures are NOT included with any mount.
They are optional and can be purchased here.

 Please read ALL notes on the pages of the mount that you are looking to purchase, this will save mis-ordered mounts from being shipped and prevent you from having to re-order and then return the wrong product.

Phoenix Triple Bow Mount

  • Phoenix 920-921 Elite Bow STYLE A
    Type A
  • PHOENIX 721 PRO TYPE B
    Type B
  • 20200916 103139
    Type C
  • thumbnail IMG 4648
    Type D
  • 2021 818 PRO BOW
    Type E
  • 6 -2022 PHOENIX 721 PRO BOW - TYPE F
    Type F
  • FIBERGLASS PHX SHROUD - 10X16 PLATE - STYLE G
    Type G
  • 2024 PHOENIX XE BOW WITH DUAL FIBERGLASS SHROUD - TYPE H
    Type H

If your bow looks like one of the bows above, this mount will fit.  Please choose the correct style in the options below.

  • IMG 0903
  • IMG 0905
  • thumbnail IMG 4367
    "HOOD" Style
  • thumbnail IMG 4374
    "HOOD" Style
  • thumbnail IMG 4377
    "HOOD" Style
  • thumbnail IMG 4376
    "HOOD" Style

Disclaimer: The 2020+ Phoenix Elite/PHX and newer XE models with Factory Dual Bow Fiberglass shroud or a 10" x 16" Plate Size, The Factory Bow Plate has NO set hole pattern for us to use to put holes in our main plate for mounting, so until Phoenix standardizes the mounting hole pattern, BBT will not put these holes in our plates. You will need to lay your factory plate or Dual Fiberglass shroud on top of our plate and mark your hole pattern in our plate and Drill holes to match your Bow Insert pattern. Make sure that the holes are marked from the top side so it will match your hole pattern in your Boat when laid in place.

 

If you have a question concerning the graphs you want to mount, call the shop and ask - 706-217-6161

Each Triple mount comes with a replacement bow plate. We have also integrated a slider bar system for the Top and Bottom row to be able to slide the units to the left and right to help miss whatever brand trolling motor you have.

**Backer plates are included for all plastic shroud Phoenix models**

 Do not go by the models listed on the pictures of these bows.  Phoenix has several different bow shrouds they can use on different model boats.  Please look at the boat and pick which type bow you have and also "measure" the plate size that is needed. If you are not sure you can email a picture of the bow and the plate measurments and I can help you chose. Email - This email address is being protected from spambots. You need JavaScript enabled to view it.

FOR MORE INFORMATION ON THE "HOOD" STYLE BOW MOUNT - PLEASE CLICK HERE.

Hood Style not available for Dash Type "F"

Types A, C, D, G and H are HOOD style ONLY

Types B and E - "Hood" is optional

Starts at: $435.00
* Plate Size:











* Enter Boat Year:

* Enter Boat Make:

* Enter Boat Model:

* Choose Sonar Manufacturer - TOP:




* Choose Sonar Manufacturer - BOTTOM LEFT:




* Choose Sonar Manufacturer - BOTTOM RIGHT:




Important

***The Bass Boat Technologies mount System utilizes the Factory Gimbal Brackets for each unit. If your units are currently Flush Mounted in the Dash or Bow, you will need to get the Gimbal Brackets to fit your unit.

No Gimbal Brackets or Knobs are supplied. All Mounting hardware is supplied with each Mount System. ***

Each Custom BBT mount comes with a replacement plate (3/16 Alum) and the mount systems are already attached and set for your choice of GPS/Sonar's

Dual Mount Conversions

 Dash Mount Conversions: Dash Conversions from a Single Mount to a Dual Mount and visa-versa are not possible.

The Single and Dual mounts are totally different Designs. If your mount is under a Year old, we do consider Trade-ins to upgrade.

Note: The BBT Heavy Duty Gimbal Brackets are Highly recommended for bow mounts. 
 
Rule of thumb on the gimbal brackets are to get "Shorty Gimbals for the Bottom Row and Regular Height for the Top Graph.
 
You can get them here - HD Gimbal Brackets
 SSL CertificateMade In The USA