The Silver Heavy Duty Gimbal Brackets that are in some mount pictures are NOT included with any mount.
They are optional and can be purchased here.

 Please read ALL notes on the pages of the mount that you are looking to purchase, this will save mis-ordered mounts from being shipped and prevent you from having to re-order and then return the wrong product.

Ranger, Falcon, Skeeter & Other Brands Steering Spacers

Starting at $70.00
SKU: Ranger__Falcon__Skeeter___Other_Brands_Steering_Spacers_1598
* Enter Boat Year / Make / Model:

* Choose Screw Head Type:

* Choose Thread Pitch:

* Spacer Size:






Ranger Falcon Spacer

Look at the picture below and measure the Center to Center of your Steering Wheel screws. It will be 2-3/4" or 2-15/16" Center to Center. Then you will need to know if the thread pitch is 5mm or 6mm.

From our experience in the past 10 years, we have determined that 99.9% of the 2-3/4" center to center measurement have 5mm threads and the 2 -5/16" center to center measurement has 6mm thread pitch. Then just pick the style screw head you have and that should be all you need.

 

Choose what style Screw Head you have by looking at the pictures shown.

b5190a83 50f1 40ea e6a4 7b67c02d5664
Measure Center to Center

24d8e13f 0455 444d fe1e 2ecb1a698c5b

Choose screw head style

Install Instructions: Make sure Motor and steering wheel is straight, take the bolts out of the steering wheel center, place our steering spacer on top of your steering cog, then put the steering wheel on top of the spacer. Then align holes and install the longer screws we send with it, tighten bolts.

Installation Time: Approximately 5 minutes.