Note: This is a Conversion kit to change your Dual Stack Bow mount to a Triple Bow mount. It contains a New Triple Top, Top Slider Bar, and Bottom Slider Bars. The Slider Bars will have holes drilled and Tapped to fit your Sonars.
|
The slider Bars are integrated into the New Triple top and they can slide both bottom units to the Left and Right to adjust for the TM cables. In order for you to convert you current mount, be sure you do have the 1-3/4" cable hole in your Bow plate, if not, there will not be enough cable hole for 3 Units. |
|
This kit is Sold as a Kit, and Not sold separately. |
|
Note: Some conversion kits need a D Leveler for a Triple mount conversion to work, when you order the Conversion Kit, you will need to mark the Box below to tell us if you already have a D Leveler on your Current mount or not. If yours requires a D Leveler, then we will send it with the conversion kit, but you will need to drill and tap holes in your current plate to mount the D Leveler. You will need a 7/32 drill bit and a 1/4-20 thread Tap. |
