Gauges in middle (from factory)
Flush mounted graph shown (factory installed)
| The Bass Cat STS series boat will normally have the gauges in the center of the dash unless the boat is ordered with a different gauge configuration. The BBT mount will be attached to a plate that will have the mount already attached. The gauges in the center portion of the dash can be relocated to the 2 Balzout mount holes and or the lower left portion of the dash. |
| If you want a Bow mount for the Jaguar STS go to Main Bass Cat Menu and Click on - https://www.bassboattech.com/boat-brand/bass-cat-boat-mounts/eyra-puma-ftd-cougar-ftd-caracal-lynx |
These Mounts are Designed to Secure the Larger GPS/Sonar Units, if you have smaller units not listed, please go to: Bass Cat Puma, Caracal, Jaguar STS - Reg. Single Dash Mount
NOTE: NOT FOR THE RIGHT HAND DASH MODEL BASSCAT
Disclaimer: The Apex Factory Gimbal brackets have a Hole Pattern in them that "Does Not" match any previous hole pattern used by Humminbird in the past. We will send a Hole pattern with mounts that have a Apex model graph and you will need to mark your factory Apex gimbal Bracket and drill 9/32 holes them to match our pattern.
Note: The BBT Cheyenne Series Apex Gimbal Brackets will have the same hole pattern in them as Helix and Solix Gimbal Brackets.
