This mount is brand new and every boat year and model are a little different, so this system should be mounted below the waterline on your jackplate when idling, but out of the water when boat is on plane.

All jackplates are not the same, you want to mount the Jackplate bracket to where the Transducer it is about 3-4 inches from the back of your transom and not hit anything when rotated upwards to the 30 degree angle (See Pic.). Like Skeeters and Caymas boats that have a fiberglass humps on each side of boat that sticks outward in the way of the Transducer, in this case your Transducer will need to be move backwards enough to miss the humps.

This Bracket system allows you to mount either the Active Target or LVS34 Transducer to your Jackplate. The bracket allows you to rotate the Transducer to "Level" and also allows you to adjust the angle of transducer looking outward in the water. Both Active Target and LVS34 Transducers should be angled upward approx. 30 Degrees. See picture for example.