2017 + RT Models - Ranger changed the steering wheel to a 1 piece Steering Wheel/ Cog. If yours boat has Hydraulic Steering, then your steering wheel should measure from the dash to the inside top edge of steering wheel, it should read about 6 3/8 - 6 5/8", If that is the case, then no spacer should be needed in most cases. If it is 4" on that measurement, then you will need a complete changeover kit to be able to add a spacer to increase area between steering wheel and unit. Steering Wheel Changeover Kit can be purchased here.
These Mounts are Designed to Secure the Larger GPS/Sonar Units.
RT178 / RT188 / RT198 - Single Mega Mount
For Option A - If you have this dash, the two smaller gauges will be moved down into our plate
For Option B - The gauges will stay in the current position. A backer plate is REQUIRED for this mount and an additional $35.00 will be added to the price.
2016 and Earlier RT Models - Your Steering wheel should have 6 screws that hold it in place. A 2 1/2" Steering Wheel spacer will be required for this mount system, which can be purchased here.
If you have a current sonar/gps unit mounted in the dash, please list in the box below. If there was no unit mounted in dash, please write "none".
If you have smaller units that are not listed in the drop down menu for GPS/Sonar, then go to the RT178 / RT188 / RT198 - Single Mount